Air Player quick setup steps

Support for Air Player desktop on ARM devices, like the Raspberry Pi.

Moderators: russ, Ralph

Post Reply
Message
Author
bmcmullan
Posts: 23
Joined: Sat Sep 02, 2017 2:33 pm
Location: Louisville, KY USA
Contact:
Contact bmcmullan

Air Player quick setup steps

#1 Post by bmcmullan »

Made notes for myself, may help others...

Follow wiki to put AirPlayer image on SD card

Boot device, device should appear under 'devices' in Air Manager Desktop

Activate Air Player
1 Activate.png


Put an existing panel onto Air Player


Click Panel
2 Put existing panel on AP.png
2 Put existing panel on AP.png (23.51 KiB) Viewed 2015 times

Clone Panel, give it a new name, click Add
3 Put existing panel on AP.png

Save configuration to Air Player
4 Put existing panel on AP.png

Set that panel to start with Air Player
6 Put existing panel on AP.png
FSX/P3D/XP11 - i7@5Ghz, GTX1080, 4 screens + Air Manager screen + custom hardware & Avionics COM, GPS, Radios, XPOND, AP (www.simav8.com)
Top
User avatar
Ralph
Posts: 7924
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:
Contact Ralph

Re: Air Player quick setup steps

#2 Post by Ralph »

There's also a video :)

Top
bmcmullan
Posts: 23
Joined: Sat Sep 02, 2017 2:33 pm
Location: Louisville, KY USA
Contact:
Contact bmcmullan

Re: Air Player quick setup steps

#3 Post by bmcmullan »

Sure enough there is! Didn't see that when going through the WIKI at http://siminnovations.com/wiki/index.ph ... _Pi_Manual
FSX/P3D/XP11 - i7@5Ghz, GTX1080, 4 screens + Air Manager screen + custom hardware & Avionics COM, GPS, Radios, XPOND, AP (www.simav8.com)
Top
Post Reply

Return to “Air Player ARM”