Hello Cherokee83
you'll have to install putty and set a connection to your Rasp Pi knowing its IP address
once connected, use linux bash command to go to "/root/Air Player" folder and do an archive in tar/zip or whatelse format
then download to your PC to send to Corjan
the best way if you are not aware with this is to use a software like WinSCP (free) set a connect with SSH protocol (port 22)
then copy the "/root/Air Player" folder on your PC and archive it from this location
I have no more Rasp Pi to copy/past commands for you, sorry
Best regards
Gilles
RPI Communication Problem
-
- Posts: 32
- Joined: Sun Dec 11, 2016 6:39 am
Re: RPI Communication Problem
SimPassion wrote: ↑Mon Dec 18, 2017 5:59 pm Hello Cherokee83
you'll have to install putty and set a connection to your Rasp Pi knowing its IP address
once connected, use linux bash command to go to "/root/Air Player" folder and do an archive in tar/zip or whatelse format
then download to your PC to send to Corjan
the best way if you are not aware with this is to use a software like WinSCP (free) set a connect with SSH protocol (port 22)
then copy the "/root/Air Player" folder on your PC and archive it from this location
I have no more Rasp Pi to copy/past commands for you, sorry
Best regards
Gilles
Thanks Gilles!
I'll try to do it and follow the instructions you gave me
Re: RPI Communication Problem
We can do that Skype session tomorrow. Probably a lot easier
Re: RPI Communication Problem
Hey,
We have been pushing instrument to the Raspberry Pi all day, and happy to say that we indeed found a crash.
This should be resolved in the latest BETA.
If you have installed the BETA version before and have the Pi connected to the internet, it should update to the latest BETA on Pi boot.
I will upload a new complete SD card image tonight though, just in case.
Corjan
We have been pushing instrument to the Raspberry Pi all day, and happy to say that we indeed found a crash.
This should be resolved in the latest BETA.
If you have installed the BETA version before and have the Pi connected to the internet, it should update to the latest BETA on Pi boot.
I will upload a new complete SD card image tonight though, just in case.
Corjan
Re: RPI Communication Problem
There is also a disk image available now, probably a safer way to upgrade:
https://siminnovations.com/wiki/index.p ... ry_Pi_BETA
Corjan
https://siminnovations.com/wiki/index.p ... ry_Pi_BETA
Corjan
-
- Posts: 32
- Joined: Sun Dec 11, 2016 6:39 am
Re: RPI Communication Problem
Hi,
I already tried using the latest beta version of Air Player Raspberry and was able to transfer the guages on my RPI but the screen was blinking on and off maybe because of the error I am experiencing with the AM3.2 beta version
Thanks for the help!
Cherokee83
I already tried using the latest beta version of Air Player Raspberry and was able to transfer the guages on my RPI but the screen was blinking on and off maybe because of the error I am experiencing with the AM3.2 beta version
Thanks for the help!
Cherokee83
Re: RPI Communication Problem
The screen itself or the image itself. I mean, maybe the monitor cable isn't connected properly, maybe it's almost loose.
-
- Posts: 32
- Joined: Sun Dec 11, 2016 6:39 am
Re: RPI Communication Problem
Yes you were right Ralph hehe
- Huberflight
- Posts: 42
- Joined: Sat Mar 31, 2018 2:27 pm
Re: RPI Communication Problem
Hi all,
i have the same Problem that is described bevor. When I load one Instr. to my PI 3b+ it works when I will load another one. It will disconnect the PI from Air Manager and no further communication is possible.
Only a new flashing of the SD Card works. But then the "Devil Cycle" starts from the beginning .
i have the same Problem that is described bevor. When I load one Instr. to my PI 3b+ it works when I will load another one. It will disconnect the PI from Air Manager and no further communication is possible.
Only a new flashing of the SD Card works. But then the "Devil Cycle" starts from the beginning .
When it looks not right, go around. It's easier to explain why you done it, than for others to finde out why you don't.
Re: RPI Communication Problem
Are you using default instruments or an instrument you've created yourself?