RPI Communication Problem

Support for Air Player desktop on ARM devices, like the Raspberry Pi.

Moderators: russ, Ralph

Message
Author
SimPassion
Posts: 5336
Joined: Thu Jul 27, 2017 12:22 am

Re: RPI Communication Problem

#11 Post by SimPassion »

Hello Cherokee83

you'll have to install putty and set a connection to your Rasp Pi knowing its IP address
once connected, use linux bash command to go to "/root/Air Player" folder and do an archive in tar/zip or whatelse format
then download to your PC to send to Corjan

the best way if you are not aware with this is to use a software like WinSCP (free) set a connect with SSH protocol (port 22)
then copy the "/root/Air Player" folder on your PC and archive it from this location

I have no more Rasp Pi to copy/past commands for you, sorry

Best regards
Gilles

Cherokee83
Posts: 32
Joined: Sun Dec 11, 2016 6:39 am

Re: RPI Communication Problem

#12 Post by Cherokee83 »

SimPassion wrote: Mon Dec 18, 2017 5:59 pm Hello Cherokee83

you'll have to install putty and set a connection to your Rasp Pi knowing its IP address
once connected, use linux bash command to go to "/root/Air Player" folder and do an archive in tar/zip or whatelse format
then download to your PC to send to Corjan

the best way if you are not aware with this is to use a software like WinSCP (free) set a connect with SSH protocol (port 22)
then copy the "/root/Air Player" folder on your PC and archive it from this location

I have no more Rasp Pi to copy/past commands for you, sorry

Best regards
Gilles

Thanks Gilles! :) :)
I'll try to do it and follow the instructions you gave me

User avatar
Ralph
Posts: 7867
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: RPI Communication Problem

#13 Post by Ralph »

We can do that Skype session tomorrow. Probably a lot easier :)

User avatar
Corjan
Posts: 2933
Joined: Thu Nov 19, 2015 9:04 am

Re: RPI Communication Problem

#14 Post by Corjan »

Hey,


We have been pushing instrument to the Raspberry Pi all day, and happy to say that we indeed found a crash.
This should be resolved in the latest BETA.

If you have installed the BETA version before and have the Pi connected to the internet, it should update to the latest BETA on Pi boot.

I will upload a new complete SD card image tonight though, just in case.


Corjan

User avatar
Corjan
Posts: 2933
Joined: Thu Nov 19, 2015 9:04 am

Re: RPI Communication Problem

#15 Post by Corjan »

There is also a disk image available now, probably a safer way to upgrade:
https://siminnovations.com/wiki/index.p ... ry_Pi_BETA


Corjan

Cherokee83
Posts: 32
Joined: Sun Dec 11, 2016 6:39 am

Re: RPI Communication Problem

#16 Post by Cherokee83 »

Hi,

I already tried using the latest beta version of Air Player Raspberry and was able to transfer the guages on my RPI but the screen was blinking on and off maybe because of the error I am experiencing with the AM3.2 beta version

Thanks for the help!
Cherokee83

User avatar
Ralph
Posts: 7867
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: RPI Communication Problem

#17 Post by Ralph »

The screen itself or the image itself. I mean, maybe the monitor cable isn't connected properly, maybe it's almost loose.

Cherokee83
Posts: 32
Joined: Sun Dec 11, 2016 6:39 am

Re: RPI Communication Problem

#18 Post by Cherokee83 »

Yes you were right Ralph hehe :)

User avatar
Huberflight
Posts: 42
Joined: Sat Mar 31, 2018 2:27 pm

Re: RPI Communication Problem

#19 Post by Huberflight »

Hi all,

i have the same Problem that is described bevor. When I load one Instr. to my PI 3b+ it works when I will load another one. It will disconnect the PI from Air Manager and no further communication is possible.
Only a new flashing of the SD Card works. But then the "Devil Cycle" starts from the beginning ;-).
When it looks not right, go around. It's easier to explain why you done it, than for others to finde out why you don't.

User avatar
Ralph
Posts: 7867
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: RPI Communication Problem

#20 Post by Ralph »

Are you using default instruments or an instrument you've created yourself?

Post Reply