Hi to all,
I’m building C172 cockpit using an external display for instruments (piloted by Air Player RPI), connected with Saitek hardware (yoke, pedals, radio panel, multi panel and switch panel).
In which way can I add a new switch (or other generic hardware), for example to check the annunciator panel lights, using an Arduino board?
Thanks!
Airplayer RPI & hardware adding
Re: Airplayer RPI & hardware adding
Hi and welcome to the forums,Deltasierra wrote: ↑Wed Feb 24, 2021 3:46 pm Hi to all,
I’m building C172 cockpit using an external display for instruments (piloted by Air Player RPI), connected with Saitek hardware (yoke, pedals, radio panel, multi panel and switch panel).
In which way can I add a new switch (or other generic hardware), for example to check the annunciator panel lights, using an Arduino board?
Thanks!
When you say 'annunciator lights' are you referring to the Saitek 'BIP' ?
Joe
Joe. CISSP, MSc.
Re: Airplayer RPI & hardware adding
Isn't that Saitek thing triggered by the sim? A annunciator test button can easily be added as a pre-made hardware function in Air Manager 4.
Re: Airplayer RPI & hardware adding
Yes,
The BIP now tends to use 'SPAD NEXT' and there is lots of info about it.
the unit is -
https://www.airsim.net/2011/01/25/saitek-apresenta-bip/ They tend to fetch between 500 and 800 euro now. but, they are an absolutely lovely bit of kit. All interchangeable title (tiles / annunciators) and also colours. amazing. They sold out quickly as they were far too expensive to produce for the price they were selling at.
The BIP now tends to use 'SPAD NEXT' and there is lots of info about it.
the unit is -
https://www.airsim.net/2011/01/25/saitek-apresenta-bip/ They tend to fetch between 500 and 800 euro now. but, they are an absolutely lovely bit of kit. All interchangeable title (tiles / annunciators) and also colours. amazing. They sold out quickly as they were far too expensive to produce for the price they were selling at.
Joe. CISSP, MSc.
-
- Posts: 26
- Joined: Wed Jan 06, 2021 7:12 pm
Re: Airplayer RPI & hardware adding
-
- Posts: 26
- Joined: Wed Jan 06, 2021 7:12 pm
Re: Airplayer RPI & hardware adding
Yes, I wish to add a simple test button for C172 annunciator panel. Is this hardware pre-made function available for Air Manager 3 for RPI too ?
Re: Airplayer RPI & hardware adding
No, only in version 4.
Re: Airplayer RPI & hardware adding
You could easily make it work without the hardware script. You just need to send the command for annunciator test depending on the state of a button. You can look at the code in the AM 4 hardware that Ralph referenced if you don’t know how to code this.
Air Manager panels at https://www.experimentalsimavionics.com
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
Youtube Channel https://www.youtube.com/channel/UC8ZqXX ... kfZMq5BKig
Air Manager API Tutorial Video Series https://youtube.com/playlist?list=PLNr0 ... baT4gJKg5D
-
- Posts: 26
- Joined: Wed Jan 06, 2021 7:12 pm
Re: Airplayer RPI & hardware adding
It works!! .... I've followed your clever suggestion Sling. I've cloned the hardware script from AM4 into my RPI Airplayer and tested.
Many thanks!