My first post here. I've been scouring the forum for answers to touch screen rotation tips and solutions but cannot find anything on my particular issue.
I'm running AP 3.7 on a Pi 3B. In default (landscape) mode it works as expected. I however, need to rotate the lcd+touch 90° clockwise to get it into portrait mode to use it as an Aspen EFD1000 GPS. Here's where I came up short. As a test I put up a Cessna heading instrument. Before rotating 90°, both instrument readout and the buttons work as they should. After rotation 90°, the images/layout rotates just fine, but the button coordinates stays at its former physical position i.e. at the very same spot it was in landscape mode.
I edited the /boot/config.txt and added this at the end of the file:
Code: Select all
# Rotate the LCD touch screen 90 CW
lcd_rotate=1
display_lcd_rotate=1
Is it possible to fix this, what can I do?
/Thom a.k.a. Captain SQ