Nearing completion of a build using a Raspberry Pi 3 and X-Plane 10 (Windows 10). Through the build / testing I've been using Ethernet to connect the Pi directly to my X-Plane PC (Windows 10). The instruments were smooth and responsive.
Unfortunately now that I've switched to WiFi on both devices, the instruments are updating unacceptably slowly. Before I revert back to Ethernet, are there any obvious things I can try changing to improve this?
As far as I can tell, all devices are on the same 2.4GHz WiFi network. I'm unsure what, if any, Firewall or Port Forwarding settings I should be looking at.
Work-in-progress photo in case anybody is interested:
https://imgur.com/a/PR8cWRH
