With the Pi, I can have two panels installed on the Pi, but how do I tell AM which one to display? Do I need a hardware switch? Can I swap in the software?
TIA
David
Selecting which panel to use
Re: Selecting which panel to use
Hi,
Air Manager and Air Player have a mode we call 'aircraft switching'.
Basically, you can show a panel based on which aircraft you are flying in the simulator.
It is not possible to switch from software,
Corjan
Air Manager and Air Player have a mode we call 'aircraft switching'.
Basically, you can show a panel based on which aircraft you are flying in the simulator.
It is not possible to switch from software,
Corjan
Re: Selecting which panel to use
Okay - I will look for how to implement that.
Re: Selecting which panel to use
Selecting the pi in the devices tab in Air Manager, it should give you three options on how to start the panel:
- Dont start
- Start on boot
- Aircraft switching
- Dont start
- Start on boot
- Aircraft switching
Re: Selecting which panel to use
I am missing something . . . . I can't find those options . . .
Re: Selecting which panel to use
Okay - so I finally figured it out. Pick the panel, and then scroll down to see further options.