Rpi 4
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Rpi 4
Corjan,
Any progress?
Do you perhaps have a image that just works on the pi4 for us to test and play with?
Keith
Any progress?
Do you perhaps have a image that just works on the pi4 for us to test and play with?
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
Re: Rpi 4
Hi,
Oh, sorry, never posted an update here.
There is a new BETA SD image available here:
https://siminnovations.com/wiki/index.p ... ry_Pi_BETA
This image works both on the Pi 2, 3 and 4.
There are some limitations on the Pi 4 though:
- second HDMI port cannot be used
- Only panels that have the same resolution as the screen show up correctly. All others look distorted
- Mouse control doesn't work (touch does).
Corjan
Oh, sorry, never posted an update here.
There is a new BETA SD image available here:
https://siminnovations.com/wiki/index.p ... ry_Pi_BETA
This image works both on the Pi 2, 3 and 4.
There are some limitations on the Pi 4 though:
- second HDMI port cannot be used
- Only panels that have the same resolution as the screen show up correctly. All others look distorted
- Mouse control doesn't work (touch does).
Corjan
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Rpi 4
Thank you for the update Corjan,
I am particularly interested in the dual display so I will wait for you to get that sorted before i start to play with the Pi4.
Keith
I am particularly interested in the dual display so I will wait for you to get that sorted before i start to play with the Pi4.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Rpi 4
Corjan,
They are small 4", 5" , 7" and 10" displays.
For the Garmin 430 the 4" and for the 530 the 5"
For the FMC the 5"
For the zibo efb the 10"
Mainly these ones
https://www.waveshare.com/product/displays/lcd-oled.htm
Keith
They are small 4", 5" , 7" and 10" displays.
For the Garmin 430 the 4" and for the 530 the 5"
For the FMC the 5"
For the zibo efb the 10"
Mainly these ones
https://www.waveshare.com/product/displays/lcd-oled.htm
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
- Keith Baxter
- Posts: 4685
- Joined: Wed Dec 20, 2017 11:00 am
- Location: Botswana
Re: Rpi 4
@Corjan
I already have 2 x RPi licences so was hoping to save a bit there by being able to have 4 instruments running.
1 x RPi4 will run the EDAI (3,5" screen) on one hdmi and the EFB (10.1" screen) on the other hdmi
1 X RPi4 will run the CPT & FO CDU/FMC both (5" screens)
After lock-down is over and my fiber is installed, It would be appreciated if we can do a session to resolve the crash and also the touch screen issue on my 10.1" RPi
That would be around the 23 April I will assume If all go well our side.
Keith
I already have 2 x RPi licences so was hoping to save a bit there by being able to have 4 instruments running.
1 x RPi4 will run the EDAI (3,5" screen) on one hdmi and the EFB (10.1" screen) on the other hdmi
1 X RPi4 will run the CPT & FO CDU/FMC both (5" screens)
After lock-down is over and my fiber is installed, It would be appreciated if we can do a session to resolve the crash and also the touch screen issue on my 10.1" RPi
That would be around the 23 April I will assume If all go well our side.
Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board, 32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card
-
- Posts: 7
- Joined: Thu Jan 23, 2020 5:25 am
- Location: Florida, USA
Re: Rpi 4
Thanks for the "Air Player 3.7 Home Use (BETA 20)" update, but I am unsuccessful getting it downloaded. Tried a couple of times, but after a few hours I get a download error, and only about 1.60 GB of the file, when i resume it starts from the beginning. I am located in the US (Florida) on a satellite connection so bandwidth and speed are limited. I may wait till things get better before trying again.
Thanks...Stay Safe
X-ray_Mike
Thanks...Stay Safe
X-ray_Mike
-
- Posts: 7
- Joined: Thu Jan 23, 2020 5:25 am
- Location: Florida, USA
Re: Rpi 4
UPDATE - download workaround
I had a friend with Google Fiber service download sd_card image. Then broke it down into smaller pieces and uploaded it to Dropbox. I downloaded it and reassembled "sd_card" file and flashed the card. That went well.
Running on Pi4 - not so good
Booted the Pi4 but it hangs on the Sim Innovation screen Hit enter key and takes me back to the TEXT screen displaying:
ERROR Platform HTTP: GET request failed: Couldn't resolve host name
That's as far as I can get, what have I done wrong?
Mike
I had a friend with Google Fiber service download sd_card image. Then broke it down into smaller pieces and uploaded it to Dropbox. I downloaded it and reassembled "sd_card" file and flashed the card. That went well.
Running on Pi4 - not so good
Booted the Pi4 but it hangs on the Sim Innovation screen Hit enter key and takes me back to the TEXT screen displaying:
ERROR Platform HTTP: GET request failed: Couldn't resolve host name
That's as far as I can get, what have I done wrong?
Mike