I am running 3.4 on my desktop
As a first sign, I was ordered to buy/activate a licence for my rpy.
I re-activated a licence which worked according to the message I got afterwards.
Nevertheless, the Rpi now cpmplaons about a version mismatch.
This is the log I downloaded from the Rpi:
07-10-2018 13:28:03 INFO AirPlayer: Version 3.4.20 HOME_USE BETA
07-10-2018 13:28:03 INFO AirPlayer: HW id = 3052189a8e6d5742bbe900a8815a4e8b
07-10-2018 13:28:03 INFO LicenseFile: Program version: HOME_USE, License: HOME_USE_STANDARD, Valid until: Unlimited
07-10-2018 13:28:04 INFO InstrumentRunner: 117b9bb9-15a4-40c1-b678-3ffc6130706b: test
07-10-2018 13:28:05 INFO SimRemoteServer: Accepted connection from 192.168.1.34
07-10-2018 13:28:05 ERROR ImageCache: Failed to convert image to 32bit: obsknobback.png
07-10-2018 13:28:30 ERROR SimRemoteServer: Lost connection with client because of timeout
07-10-2018 13:28:31 INFO SimRemoteServer: Accepted connection from 192.168.1.34
Any idea what I can do ?
'version mismatch '
'version mismatch '
Air Manager 3.6 Home Use - Rpi AirpLayer with 7" Touchscreen
Re: 'version mismatch '
Hi,
Make sure that the pi is connected to the internet, and reboot it.
It should update the Pi to update to it's latest version.
Right now, the image on the site is outdated, I will correct this next week.
Corjan
Make sure that the pi is connected to the internet, and reboot it.
It should update the Pi to update to it's latest version.
Right now, the image on the site is outdated, I will correct this next week.
Corjan
Re: 'version mismatch '
The Rpi is definitely connectec to the internet.
Reboot did not change anything. Version is before an after update (?) 3.4.20.
Is it intended to update AirPlayer without downloading and programming a whole SD-card ?
I have severel settings which always get lost in case I have out use an out-of-the-box image
Reboot did not change anything. Version is before an after update (?) 3.4.20.
Is it intended to update AirPlayer without downloading and programming a whole SD-card ?
I have severel settings which always get lost in case I have out use an out-of-the-box image
Air Manager 3.6 Home Use - Rpi AirpLayer with 7" Touchscreen
Re: 'version mismatch '
Hi,
Seems like you are running a BETA version. Since there is no active BETA version at the moment, it won't update.
Use the official version here:
https://siminnovations.com/wiki/index.p ... stallation
Note that this version will only connect to the corresponding official AM 3.4 release. The AM 3.5 BETA won't work.
Please make sure to connect the pi to internet at least the first boot, so it can update.
Corjan
Seems like you are running a BETA version. Since there is no active BETA version at the moment, it won't update.
Use the official version here:
https://siminnovations.com/wiki/index.p ... stallation
Note that this version will only connect to the corresponding official AM 3.4 release. The AM 3.5 BETA won't work.
Please make sure to connect the pi to internet at least the first boot, so it can update.
Corjan