Hi team !
I am using the last AirPlayer 3.4 for Pi with a Pi3 modelB unit.
The Pi is wired connected on the LAN and its HDMI output goes to the target monitor.
Everything is ok (panel & gauges displayed correctly) BUT the yellow flash icon we can see with the simInnovation logo during the Pi boot is still displayed over the panel.
Any tip to remove this flash icon ?
Thanks
Philippe
Yellow flash icon displayed over my gauges
Re: Yellow flash icon displayed over my gauges
It means that there's an undervoltage. It comes on from 4.7 volt. There's more about it here: https://raspberrypi.stackexchange.com/q ... wer-supply
Re: Yellow flash icon displayed over my gauges
Thanks for your quick answer Ralph !
You are right, It was the power supply. I bought a new 2A one today and no more yellow flash icon displayed
You are right, It was the power supply. I bought a new 2A one today and no more yellow flash icon displayed
Re: Yellow flash icon displayed over my gauges
That's good to hear. Not all 2A power supplies really supply what they advertise. I don't know why, bad voltage regulator maybe.