So I thought I would give one if my PI3's a chance. Its a model b+.
First issue is that the airplayer3 executable fails with siI2c warnings about fail to open device. Running the executable through strings I can see that it appears to reauire the /dev/i2c-1 device to exist. The hyperpixel 4 is using all i2c pins but pin 11. To work around that issue one can simply create a link from /dev/i2c-11 to /dev/i2c-1 as in:
Code: Select all
# sudo ln -s /dev/i2c-11 /dev/i2c-1
When a panel is "Shown" on the pi only the panel, with its chosen background, is rendered and not any instrument. I created a simple panel with a Cessna 172SP Callsign and the callsign won't show up!
This is what the log says:
Code: Select all
22-06-2021 22:00:21 INFO AirPlayer: Version 4.0.3 HOME_USE
22-06-2021 22:00:21 INFO AirPlayer: HW id = 3052189a8e6d5742735f693f93de0a46
22-06-2021 22:00:21 INFO LicenseFile: Program version: HOME_USE, License: HOME_USE_FREE, Valid until: Unlimited
22-06-2021 22:00:21 INFO SimNavClient: Connected to 192.168.0.40
22-06-2021 22:00:21 INFO SimRemoteServer: Accepted connection from 192.168.0.40
22-06-2021 22:00:21 INFO SimBusConnectionHandler: Discovered X-plane on 192.168.0.40:55556 (am_port=55558)
22-06-2021 22:00:21 INFO Project: Aircraft changed from '(null)' to 'TBM 900 Published by X-Aviation'
22-06-2021 22:02:29 INFO LinuxTouchInputEvent: Bound to touch on /dev/input/event0
Code: Select all
22-06-2021 22:05:32 INFO LinuxTouchInputEvent: Bound to touch on /dev/input/event0
22-06-2021 22:06:31 INFO LinuxTouchInputEvent: Bound to touch on /dev/input/event0
22-06-2021 22:06:37 INFO LinuxTouchInputEvent: Bound to touch on /dev/input/event0
22-06-2021 22:07:10 INFO LinuxTouchInputEvent: Bound to touch on /dev/input/event0
-- Magnus