In Air Manager 4 I have added two G1000 overlay instruments to an Air Player 4 panel. In the instrument settings you should be able to choose the position of the G1000 (captain PFD, co-pilot PFD or MFD). Unfortunately the user properties are not shown in the instrument settings, so I cannot change the position and it still defaults to captain PFD in both instruments. When adding the same instrument to an Air Manager 4 panel there is no problem and the properties are available as expected.
Air manager: home 4.0 beta 33
Air Player: 4.0 beta 33
Instrument user properties not shown in Air Player 4 panel
- WillemijnL
- Posts: 107
- Joined: Sat Jan 30, 2016 1:14 pm
Re: Instrument user properties not shown in Air Player 4 panel
Good one, I haven't tested that probably. Also good to check the hardware settings. Will do this week.
Re: Instrument user properties not shown in Air Player 4 panel
I gave it a try just now, and it works fine here. Are you sure you have the overlay selected and not the 'complete' G1000 from Crashtender?