Hi,
All of the sudden I noticed that my hardware encoders don't work anymore when connected to the PC that runs Airplayer. It used to work perfectly and still does if I connect the hardware to airmanager. But it does not on airplayer. I am running the latest version on all programs.
Any ideas?
Thanks
Berthold
Airplayer Encoder problem
-
- Posts: 50
- Joined: Thu Nov 29, 2018 2:58 pm
- Location: Spain
Airplayer Encoder problem
--
CPL/IR/ME/FI
Airmanager 4.1
CPL/IR/ME/FI
Airmanager 4.1
Re: Airplayer Encoder problem
I bought air manager on my better computer. I bought air player on my lesser computer. I can get the G1000 to sync on both. I can get my arduino to work on the better computer but not on the lesser(air player computer). I send the modified G1000 to air player but it only works on the better computer that I want with the better graphics. How do I get to drive the panel on the lesser computer so I can put my panel there?
Re: Airplayer Encoder problem
Troubleshoot... Check the connections (hardware), try with a test instrument, make sure that the Arduino's are connected to Air Player and not to other software, etc...