Development of communication equipment cessna 182 A2A

Working on a instrument project or just finished a project? Show it to others!

Moderators: russ, Ralph

Post Reply
Message
Author
cristian
Posts: 32
Joined: Wed Nov 14, 2018 7:53 pm

Development of communication equipment cessna 182 A2A

#1 Post by cristian »

Good morning to all. I am looking for a developer who is interested in creating the communication and navigation equipment (the software part) such as the autopilot, ADF, transponder and DME for the A2A cessna 182 aircraft to run on a monitor. (URGENT) :ugeek: :geek:
Image
Attachments
Captura.JPG

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Development of communication equipment cessna 182 A2A

#2 Post by Ralph »

I did give this a try a long long time ago, but got stuck. Although I must say that I didn't push it that far. I couldn't find any LVAR's for a lot of their custom stuff, like the autopilot. But maybe if you ask at their forums.

cristian
Posts: 32
Joined: Wed Nov 14, 2018 7:53 pm

Re: Development of communication equipment cessna 182 A2A

#3 Post by cristian »

I found all the A2A lvars for the cessna 182 if I give it to you it could do the job

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Development of communication equipment cessna 182 A2A

#4 Post by Ralph »

I am aware of this list with lvars for the 182, but it does not contain all the required variables.
https://www.dropbox.com/s/3jgm4s6c3mx3r ... t.pdf?dl=0

cristian
Posts: 32
Joined: Wed Nov 14, 2018 7:53 pm

Re: Development of communication equipment cessna 182 A2A

#5 Post by cristian »

So if it would be difficult to get the autopilot, ADF, DME and transponder equipment to work or if there is a possibility to adapt the airmanager equipment to work well with the A2A aircraft

jasong
Posts: 101
Joined: Sun Oct 20, 2019 8:18 am

Re: Development of communication equipment cessna 182 A2A

#6 Post by jasong »

I’m currently making these units here https://siminnovations.com/forums/viewt ... 1&start=40

User avatar
Ralph
Posts: 7878
Joined: Tue Oct 27, 2015 7:02 pm
Location: De Steeg
Contact:

Re: Development of communication equipment cessna 182 A2A

#7 Post by Ralph »

It depends, I don't remember correctly, but I remember that for the Cessna 172 I was missing a few variables to perfectly resemble their instruments. We don't have time for it, but maybe someone else on the forums is interested to investigate and develop.

cristian
Posts: 32
Joined: Wed Nov 14, 2018 7:53 pm

Re: Development of communication equipment cessna 182 A2A

#8 Post by cristian »

jasong wrote: Mon Mar 15, 2021 9:51 am I’m currently making these units here https://siminnovations.com/forums/viewt ... 1&start=40
It is developing the DME, I saw recently in the A2A forum of a man who developed the DME, THE RADIO and TRANSPONDER for cessna 172. but the problem is that I encode it with link2 and arduino and it only supports fsx and not prepard3d this is your link https://a2asimulations.com/forum/viewto ... 07&t=71594

cristian
Posts: 32
Joined: Wed Nov 14, 2018 7:53 pm

Re: Development of communication equipment cessna 182 A2A

#9 Post by cristian »

Ralph wrote: Mon Mar 15, 2021 9:57 am It depends, I don't remember correctly, but I remember that for the Cessna 172 I was missing a few variables to perfectly resemble their instruments. We don't have time for it, but maybe someone else on the forums is interested to investigate and develop.
yes that's just what i'm doing thanks for your help friend

Post Reply