AT-6G Texan Real to Sim Conversion

Are you building a cockpit, planning to build one or just dreaming, this is your cockpit builder meeting point

Moderators: Ralph, russ

Post Reply
Message
Author
User avatar
warbirdguy1
Posts: 10
Joined: Sat May 01, 2021 12:57 am
Location: United States

AT-6G Texan Real to Sim Conversion

#1 Post by warbirdguy1 » Mon May 10, 2021 10:52 pm

Hey all,

I obtained an AT-6G Texan a little ways back and are in progress to convert it into a functional flight simulator using Perpar3D as the base simulator environment.

This will be my first simulator fuselage I convert with the intent on using Air Manager as the primary tool to drive my hardware.

I have a fair bit of experience with MobiFlight on a communal A-4 Skyhawk and Cessna 152 I built with friends but feel with some learning Air Manager is a vastly more capable tool.

Image
https://imgur.com/Fupd7g0

Image
https://imgur.com/KHEl6I7
"I know just enough to break something"

User avatar
Keith Baxter
Posts: 2799
Joined: Wed Dec 20, 2017 11:00 am
Location: Botswana

Re: AT-6G Texan Real to Sim Conversion

#2 Post by Keith Baxter » Fri May 14, 2021 12:30 pm

Hi,

Oh WOW. Thank you for sharing.
That is an amazing project. I sure hope you are not going to replace that panel with a flat screen. :twisted:

Many of us will be following the progress and look forward to the next update.


Keith
AMD RYZEN 9 5950X CPU, Corsair H80I cooler, ASUS TUF GAMING B550-PLUS AMD Ryzen Mother Board,  32Gb ram Corsair Vengeance 3000Mh, MSI GTX960 4G graphics card 

User avatar
jph
Posts: 640
Joined: Fri Apr 10, 2020 12:50 pm
Location: Portugal

Re: AT-6G Texan Real to Sim Conversion

#3 Post by jph » Sat May 15, 2021 11:58 am

Keith Baxter wrote:
Fri May 14, 2021 12:30 pm
Hi,

Oh WOW. Thank you for sharing.
That is an amazing project. I sure hope you are not going to replace that panel with a flat screen. :twisted:

Many of us will be following the progress and look forward to the next update.


Keith
YE GADS ! - Keith - I misread and thought you said - " I hope you are going to replace that panel with a flat screen"
I nearly fell of my chair. :shock:
I was about to apply the curse of Beelzebub on you for sacrilege ....
Phew... :o ;)
NEVER EVER replace mechanical gauges you have with false prophets of the LCD... :!:

Mech' gauge are simply the best.
I - personally - Hate looking at garmin units and other 'modern' LCD type instrument displays as I could be flying in ANY generic aircraft. There is simply no 'personality' to the experience. (imho of course. ;) )
“Everything in moderation, including moderation.”
“Experience is merely the name men gave to their mistakes.”
Joe (CISSP) -IT security consultant

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests