Aspen EFD1000

[Shawn]

I started work on a 3D printable bezel for the Aspen EFD1000.

[Keith Baxter]

Awesome

[Ralph]

Won't you rather use the premium version? It uses the original aspect ratio, 400x760 px.
http://siminnovations.com/wiki/index.ph ... en_EFD1000

[Shawn]

Hey Ralph, I have the premium version but the screenshot I used in the cad model must have been from the standard version, I was wondering why it didn’t fit properly. I had the premium version running on a 7” Lcd to see how it fit and take some measurements and it’s going to be great.

[Ralph]

Glad to hear!

[Sling]

Nice work Shawn.

[therictus]

Hi Shawn

I'm interested in building an EFD1000 for my Arrow III instrument panel. Any chance of getting hold of the STL so I can print my own bezel?

Thanks

Rich

[Shawn]

Hello Rich

Sorry for the late reply. I will have a look at the file and see if I can get it finished. At the moment it's really quite basic and might not be worth printing. I would be happy to share the STL though.

Cheers
Shawn

[Ralph]

It looks like one doesn't use the original Aspen screen size, so it won't work with the premium Aspen panel. That uses the original 400x760 screen size/aspect ratio.

[Shawn]

Sorry for the delay in getting this file uploaded. This STL is nothing more than the bezel and I'm not sure it will be of much use to anyone at the moment. I will try and get something finished that will be a bit more useful and will upload it when I can.

https://www.dropbox.com/sh/htcvyxf8pwc0 ... 7KDfa?dl=0

Cheers
Shawn