A2A Support for C172SP premium panel

You can talk about anything flight (simulation) related here

Moderators: russ, Ralph

Post Reply
Message
Author
wthielke
Posts: 1
Joined: Thu Jul 25, 2019 1:44 pm

A2A Support for C172SP premium panel

#1 Post by wthielke »

Any idea when A2A support will be included in the C172SP panel? I just purchased it, but several instruments don't work, in particular:

- RPM -- the RPM values shown are lower than the actual values; I fixed this by swapping it out with the free version
- BAT switch -- the BAT switch doesn't work, though the ALT switch does.
- Fuel selector -- it switches the actual fuel selection, but the lever always shows BOTH, after briefly showing the correct position;
- Fuel shutoff
- S-Tec AP: The only mode that seems to work is NAV mode. HDG and ALT don't work. I also tested in a default P3D plane and it works there, just not in the A2A C172.
- Audio panel -- nothing seems to work
- Oil pressure warning is always on

Post Reply