Page 1 of 1

Z2DXP MCP / EFIS (CAPT & FO) for ZiboMod HARDWARE feature BETA TESTING Request

Posted: Sun Jul 14, 2019 9:08 pm
by SimPassion
Could anybody please check the MCP and EFIS (CAPT & FO) for hardware handling and report if all seems working as expected using encoders/buttons/switches ?

Regards
Gilles

Re: Z2DXP MCP / EFIS (CAPT & FO) for ZiboMod HARDWARE feature BETA TESTING Request

Posted: Sun Jul 28, 2019 9:09 am
by baranismen
I can confirm that for MCP all encoders, buttons, and switches are working as intended once mapped thru Arduino. However one has to change codes for getting hardware displays I guess.

Re: Z2DXP MCP / EFIS (CAPT & FO) for ZiboMod HARDWARE feature BETA TESTING Request

Posted: Sun Jul 28, 2019 9:18 am
by SimPassion
There's so many solutions and taste for dispaying values that I can't focuse on adding coding for this for one specific choice inside the MCP, not even for everyone available
Feel free to add the display part on your own which could be achieved in an additional instrument outside the MCP itself

Gilles

Re: Z2DXP MCP / EFIS (CAPT & FO) for ZiboMod HARDWARE feature BETA TESTING Request

Posted: Mon Aug 05, 2019 7:40 am
by SimPassion
At some point it could be frustrating to get not much feedback/help for reporting any issue in the instrument usage (so I've discover by myself yesterday that there's the V/S wheel missing hardware handling in MCP, then I will add it before submitting)
Rather than this it come interesting what's the instruments usage and where the simmers are focusing, or where are their need
so here's the current results and it appear that the EFB is winning the higher needs/usage, where at the opposit, the CDU is, currently, on the lower download hits
hope the hardware handling will help at some time, those are using instruments with their hardware cockpit

Gilles

Z2DXP_Download_Statistics.jpg