Hi Joe I Just wanted to give you an update I successfully loaded the blink program into the Uno. I then connected to Air manager and was able to download the firmware into it I then tried with the mega and it didn't connect to either to Arduino software or Air Manager (after selecting the correct co...

Hi Joe I've just found a spare Arduino mega board and I can flash the air manager firmware to it - It works perfectly The issue I have is with the 2 arduino boards. It has nothing to do with air manager Something is corrupt on these 2 boards Im going to use the spare and buy another uno board - It w...

Hi Joe I didn't realise the com port stays the same - That bit works ok then I've tried what you suggest by disconnecting every USB device I can re-flash the 2 devices that worked anyway so I know Air manager and the USB cable is working correctly and no firewall etc The 2 devices that I cant flash ...

Hi Guys Ive had 4 arduinos connected and all working correctly to air manager 3.7.10 - 2 arduino megas and 2 arduino unos - Channels A,B,C and D Ive moved house recently so not switched my pc on for about 6 months When connecting today only 2 of the devices were recognised in air manager - one mega ...

Hi Everyone Im considering switching the controls of my cockpit to Air Manager. I currently use Simvin but am plagued by connection issues. I have made a B737 cockpit. I use Xplane and Zibo. I will use air manager for steppers (Gauges), seven segments and a few analogue inputs I have a few questions...

Hi Sling and Keith Sling, Thanks for your patients and help. It works now. Great explanation of dataref types as well. I knew it would be something simple. Thanks for the prompt Keith - I'm having trouble with Dataref tool at the moment. If you run in full screen mode, when you load up Dataref tool,...

Thanks for the code. I will try it later I have attached another pic. I didnt think to use the snipping tool I cant show you when the valve moves. its too quick. When it goes between 0 and 1 its a decimal number with 6 decimal places I will let you know how I get on with the code Thanks Mark Capture...

Pic Attached Its the 2nd dataref down. When the valve is fully open or closed it reads exactly a 0 or 1. When the valve is moving it reads the decimal places - As in the pic - Sorry its not very clear - You might have to zoom in. I know its a floating point number but I dont know how to tell which t...

Hi When I run the instrument in create/edit I get no errors if I write to the script a value between 0 and 1 (in Run/create/edit) the servo moves roughly between 0 and 180 degrees Its just when I run the instrument with Xplane. I can see the dataref go between 0 and 1 using datareftool but the servo...

Hi I want to use air manager for some of my cockpit hardware. i use xplane and zibo and an arduino mega. I have got a servo to work using the example "engine RPM" script on the siminnovations website When I try and subscribe to a Zibo dataref the servo doesn't work. Ive tweaked some of the...