Hi, if there was a demand and also a need and desire then someone would make them. Obviously there seems to be none to make anything viable. Most don't bother with the default aircraft as they tend to be crap.
Regards
Joe

You are better with HDMI / USB adapters or thunderbolt 3/4 to display output - also some versions of USB 3 - where specifically stated, can help IF you need display port. If the sling man is doing it then there is a reason his setup is working but how well ? who knows. It is one thing testing ...

Hi, there is a 24" ultrawide wide monitor available that should fit 2 x g1000. It is NOT curved, also. not touchscreen,but,very nice. ;) Otherwise, yes, you can enable the on CPU GPU if it has one - I have no idea about AMD as I only use intel for the CPU. Otherwise, if you have usb C, then consider ...

Keith Baxter wrote: ↑Sat May 25, 2024 11:35 pm Hi,

With more and more glass instruments becoming available we are trying to replicate. So.....

1) Touch screen swipe (left and right) and swipe (up and down)



2) Two finger in and out. (ZOOM FUNCTION).



Thanks

Hi Keith, option 2 may give you more than you bargained for.....

You are using a mac, that is a big issue. Use windows, a REAL OS.

Also, check all the FAQ for network issues on the site.

Absolutely agreed Ralph. I Do not personally think it is commercially viable to support the PI. It was always a fringe product and obviously never intended for commercial use. 1 single windows device can run the power of many many pi devices. Often at far less cost.
Joe

nnyerges wrote: ↑Tue May 07, 2024 3:11 am Ralph, Really?... Its and Arduino connected to the Raspberry bro... REMENBER, it was a bug from last year viewtopic.php?t=7420 LAST YEAR

'bro'

????????????????? are you related ? incredible... seems like PBCAK - again..........

Yes I use custom board where I have 10uF and 0.1uF capacitors in parallel for each IC. Not jelly bean but SMD ceramic but I believe they work the same. Also, the power and ground line is totally parallel for all ICs, no diode or register in series. Do you think still think this issue is caused by ...

In 1995 I was playing FS5 and Commander Keen 4. Recently I just started an old vintage computer and wondered how I could stand 320x200 pixels in my youth? :) The graphics of the simstrumentation G3000 look much better, and they are for free anyway. :lol: lol Frumpy. in 1995 I was working with ...

exactly @Ralph
You can swap the gnd and vcc which will only change direction. The 'output' commonly known as the 'wiper' is almost universally the centre pin on a 3 pin device.
Cheers.
Joe