Hi, if there was a demand and also a need and desire then someone would make them. Obviously there seems to be none to make anything viable. Most don't bother with the default aircraft as they tend to be crap.
Regards
Joe
Search found 2866 matches
- Sun Jun 23, 2024 6:31 am
- Forum: Air Manager Help
- Topic: Airliner instruments for default aircraft lacking
- Replies: 7
- Views: 4318
- Fri May 31, 2024 5:38 am
- Forum: Cockpit building
- Topic: Adding a 5th Monitor - HELP
- Replies: 15
- Views: 7503
Re: Adding a 5th Monitor - HELP
You are better with HDMI / USB adapters or thunderbolt 3/4 to display output - also some versions of USB 3 - where specifically stated, can help IF you need display port. If the sling man is doing it then there is a reason his setup is working but how well ? who knows. It is one thing testing ...
- Wed May 29, 2024 7:14 am
- Forum: Cockpit building
- Topic: Adding a 5th Monitor - HELP
- Replies: 15
- Views: 7503
Re: Adding a 5th Monitor - HELP
Hi, there is a 24" ultrawide wide monitor available that should fit 2 x g1000. It is NOT curved, also. not touchscreen,but,very nice. ;) Otherwise, yes, you can enable the on CPU GPU if it has one - I have no idea about AMD as I only use intel for the CPU. Otherwise, if you have usb C, then consider ...
- Mon May 27, 2024 7:17 am
- Forum: Air Manager
- Topic: Air Manager 4.3
- Replies: 116
- Views: 124247
Re: Air Manager 4.3
Hi Keith, option 2 may give you more than you bargained for.....Keith Baxter wrote: ↑Sat May 25, 2024 11:35 pm Hi,
With more and more glass instruments becoming available we are trying to replicate. So.....
1) Touch screen swipe (left and right) and swipe (up and down)
2) Two finger in and out. (ZOOM FUNCTION).
Thanks
- Tue May 21, 2024 11:41 am
- Forum: Air Manager Help
- Topic: No Network Connection
- Replies: 10
- Views: 3737
Re: No Network Connection
You are using a mac, that is a big issue. Use windows, a REAL OS.
Also, check all the FAQ for network issues on the site.
Also, check all the FAQ for network issues on the site.
- Sun May 19, 2024 6:32 am
- Forum: Raspberry Pi
- Topic: AIR PLAYER 4.2.9 for Raspberry BUG REPORT #1 (Issue: GPIO Autoplay)
- Replies: 13
- Views: 6575
Re: AIR PLAYER 4.2.9 for Raspberry BUG REPORT #1 (Issue: GPIO Autoplay)
Absolutely agreed Ralph. I Do not personally think it is commercially viable to support the PI. It was always a fringe product and obviously never intended for commercial use. 1 single windows device can run the power of many many pi devices. Often at far less cost.
Joe
Joe
- Thu May 09, 2024 7:23 am
- Forum: Raspberry Pi
- Topic: AIR PLAYER 4.2.9 for Raspberry BUG REPORT #2 (Issue: STEPPER MOTORS)
- Replies: 35
- Views: 10026
Re: AIR PLAYER 4.2.9 for Raspberry BUG REPORT #2 (Issue: STEPPER MOTORS)
nnyerges wrote: ↑Tue May 07, 2024 3:11 am Ralph, Really?... Its and Arduino connected to the Raspberry bro... REMENBER, it was a bug from last year viewtopic.php?t=7420 LAST YEAR
????????????????? are you related ? incredible... seems like PBCAK - again..........'bro'
- Wed May 01, 2024 8:58 am
- Forum: Arduino
- Topic: dont get my MAX 7219 Hardware Display to work
- Replies: 40
- Views: 19218
Re: dont get my MAX 7219 Hardware Display to work
Yes I use custom board where I have 10uF and 0.1uF capacitors in parallel for each IC. Not jelly bean but SMD ceramic but I believe they work the same. Also, the power and ground line is totally parallel for all ICs, no diode or register in series. Do you think still think this issue is caused by ...
- Tue Apr 30, 2024 8:41 am
- Forum: KnobFS
- Topic: G3000 Modes Honda Hjet
- Replies: 4
- Views: 3460
Re: G3000 Modes Honda Hjet
In 1995 I was playing FS5 and Commander Keen 4. Recently I just started an old vintage computer and wondered how I could stand 320x200 pixels in my youth? :) The graphics of the simstrumentation G3000 look much better, and they are for free anyway. :lol: lol Frumpy. in 1995 I was working with ...
- Tue Apr 30, 2024 8:37 am
- Forum: Air Manager
- Topic: Linear Potentiometer
- Replies: 2
- Views: 2105
Re: Linear Potentiometer
exactly @Ralph
You can swap the gnd and vcc which will only change direction. The 'output' commonly known as the 'wiper' is almost universally the centre pin on a 3 pin device.
Cheers.
Joe
You can swap the gnd and vcc which will only change direction. The 'output' commonly known as the 'wiper' is almost universally the centre pin on a 3 pin device.
Cheers.
Joe